Eberspacher Calltronic Manuel d'utilisateur télécharger pdf (Page 9)

VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 9

PROGRAM FUNCTIONS

Input command Description of program functions

1234TIMER1:XXX Enter a heating period from 001 to 999 minutes. If you dial

000, the heater is in continuous heating mode until it is

switched off by a phone call, by SMS with the input command

“STOP” or manually.

1234ASPONSE:ON

Feedback for each input command sent by SMS – for maximum

safety, the ON setting is recommended.

1234ASPONSE:OFF Switch off feedback for each input command sent.

1234ACCLIM:XXXXXXX Up to 5 landline / mobile phone numbers can be saved. Enter

the last 7 digits of the phone number of your landline / mobile

phone in the Calltronic. If your landline phone number is less

than 7 digits long, use the end digits of the dialling code to

make up the 7-digit number. All phone numbers must be en-

tered on one line without interruption, separated by a colon (:).

Example of the input of 2 phone numbers:

1234ACCLIM:XXXXXXX:XXXXXXX

If one or several numbers are to be added or changed, all the

numbers have to be entered again.

1234SETDEFAULT Calltronic is reset to the factory settings.

By doing this, the system is initialised within approx. 5 min-

utes, i.e. all the customer’s data is deleted and has to be re-

entered.

2 ADJUSTMENT AND OPERATION

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Eberspacher Calltronic Manuel d'utilisateur Page 9